Tools for working the unfired Silver-Clay such as texture plates, clay tools cork clayand paper clay.
Items 1-28 of 28

Brooch Finding 35 mm Fine Silver (discon

This fine silver brooch is 35mm long and needs to be mounted with slip and lined up correctly. Pure Silver
1 piece (35mm) DO NOT FIRE THE PIN.
  • $9.39
  • Availability: 18

Plastic Strips 1 mm Thick (set of 2)

One pair of plastic strips. (1mm thick 5" Long and 3/4" wide) Used as a thickness gauge when rolling out Silver-Clay. Very durable!
  • $2.08
  • Availability: 18

Ring Sizers

wrap it around your finger, it tells you your ring size. Or wear it as a ring.
  • $1.35
  • Availability: 99

NuBlade 6" x 3/4" Polyblade

NuBlade Here is the first blade designed specifically for use with polymer clay. The NuBlade is a full 6" long, 3/4" wide, and is thicker than razor blades. It provides clean, accurate cuts even on large diameter canes or polymer clay blocks. Made of stainless steel, it resists oxidation and stays sharp two to three times longer than other blades.
  • $6.20
  • Availability: 4

Blade 6" Polyblade Flexible

NuFlex This unique, super flexible blade makes curved cuts and arcs in polymer clay or canes. It is a full 6" long, is made of stainless steel, and makes micro thin cuts like the NuBlade. This blade allows the user to create a wide variety of shapes that cannot be made with other blades.
  • $8.25
  • Availability: 4

Clay Roller Solid Acrylic 8"

Clay Roller This handy, portable roller is ideal for working with polymer clay at home or while traveling. It is an 8" solid acrylic rod designed to help condition polymer clay, roll out sheets, and smooth clay surfaces. It has a non-stick surface that wipes clean with alcohol for easy clean-up.
  • $11.35
  • Availability: 2

Shrink Rule % Of Shrinking

Stoneware clays shrink about 6% from web to bone dry. They shrink insignificantly in the bisque firing, and about 6% in a cone 10 glaze firing. Total shrinkage from wet to glaze fired is therefore about 12% when working at cone 10. Different clays shrink somewhat more or less. A lower glaze firing temperature will produce a lower shrinkage rate. Your piece may shrink more in one direction than another direction also. For instance, a thrown cylinder may shrink a greater percentage in its diameter than in its height. A rolled slab may shrink a greater percentage in the rolled direction than in its width. A little experimenting with the Creative Industries Shrink Rule will quickly give you a high degree of accuracy in predicting shrinkage in your particular clay, in your studio, using your techniques. Instructions: 1. If you want a piece to measure 8" after a 12% shrinkage, use the 12% scale on your Shrink Rule to measure 8" on the wet clay. 2. To make a replacement lid for a casserole which has been bisqued, measure the casserole with a regular ruler. Use this same measurement on the wet clay using the 6% scale on your Shrink Rule. 3. Your friend just broke her teapot lid. You have lots of teapot lids which have been bisqued, but which one, after its glaze firing will fit your friends teapot? Measure the teapot with a regular ruler. Now find the bisque lid with the same measurement using the 6% scale on your Shrink Rule.
  • $12.95
  • Availability: 0

Delight Air Dry Modeling Compound 3 oz

Delight™ is an exciting new modeling medium. It is extremely lightweight and very soft and easy to shape or mold. It is very clean to use and picks up details beautifully. (Please note that the 3 oz. package of Delight is approximately the same volume as the 8 oz. of our original Creative Paperclay® brand).

This material, pure white and non-toxic, is ideal for PMC®.
Use the compound to create a model or form that you can coat with a thin sheet of clay. Leave a small hole in the clay, then fire the piece. The compound burns out completely (no ash or residue of any kind), leaving a hollow, lightweight metal form.
Make beads, pendants, charms and more with this amazing paper clay. The compound dries to a firm, spongey hardness and is durable—pieces can be carved, sanded, detailed or painted.

  • Original Price: $5.49
  • You Save: $0.55
  • $4.94
  • Availability: 6

Paper Clay 4 oz

Creative Paperclay A paper based modeling material. Sculpt a bead, paint it with 3 coats of silver Slip and fire. The Paperclay burns out leaving a hollow bead.
  • Original Price: $3.99
  • You Save: $0.40
  • $3.59
  • Availability: 11

Investment for Silver, Glass, Metal

A mix that requires 35% water. Example: to 100 grams of investment use 35 grams of water, or use approx 2 Tablespoons investment, to 2.5 teaspoons of water. Sets in 6-8 Minutes. Dry before using.
CAUTION Contains free silica. Avoid breathing the dust.
To make a Ring Form wrap a piece of paper around the finger needing a ring, carefully tape it so it holds it's shape. Place paper ring on a smooth surface and fill with investment mix. +Allow a day to dry, and make a ring larger than the investment finger you have made place the larger ring (two sizes) on the cylinder and fire! Investment washes out under water after firing.
  • $3.99
  • Availability: 3

Small Detail Carving Tool

Detail Carving Tools easily carve small and miniature details. They are perfect for that extra touch. The steel blades are formed and precision ground to a sharp point. The DCS tip is a .030" wide point and 5" in total length, while the DCL point is .057" wide and 5" in total length. In the picture, the DCS has the smaller of the two tips. DCS
  • Original Price: $4.39
  • You Save: $0.44
  • $3.95
  • Availability: 5

Hole Cutter 3/16" Dia x 5.75" Length

Hole Cutters provide an easy method for cutting clean holes in wet thick-wall greenware and wet clay. All five sizes can be used to achieve a variety of designs. All of these hole cutters have sharp, polished brass, cutting tubes with the smaler sizes firmly set in hardwood handles. The two larger tubes have ends covered wit a rubber cap for comfort. The HC1 is the smallest hole cutter in the picture. (On the bottom.) HC1
  • Original Price: $4.09
  • You Save: $0.41
  • $3.68
  • Availability: 5

Patching Spatula

PAS The Patching Spatula is used for patching greenware. It is also used as a small palette knife. It contains two stainless steel blades (1" and 1 1/2") inserted in hardwood handles.
  • Original Price: $4.09
  • You Save: $0.41
  • $3.68
  • Availability: 20

Potter's Cut-Off Needle

PCN The Potter's Cut-Off Needle is a necessity for all potters, this 1 15/16" long, thin heat-treated steel needle makes a clean smooth cut with a minimum of drag when removing the uneven top edge of thrown items.
  • Original Price: $1.15
  • You Save: $0.11
  • $1.04
  • Availability: 33

Tissue Slicing Blade 4.5" 2/pk

Slicing Blades for polymer clay canes and Silver-Clay projects 4.5" by 3/4" Package of two.
  • Original Price: $5.39
  • You Save: $0.54
  • $4.85
  • Availability: 25

Scalpel Plastic

Scalpel SHARP!
  • Original Price: $2.09
  • You Save: $0.21
  • $1.88
  • Availability: 55

Wipe Out Tool

Wipe Out Tool WOT, soft rubber tips allow easy sculpting where fingers are too big.
  • Original Price: $6.49
  • You Save: $0.65
  • $5.84
  • Availability: 23

Roller 7" PVC 3/4"

Roller 7" PVC 3/4"
This roller and a deck of cards is all you need to roll out Silver-Clay.
Make stacks of cards 3 or 4 high to use as rolling thickness guides. and use the 3 (or 4) as the top cards so you will know how many are in each stack. Use these stacks to vary the thickness of your silver clay slabs.
  • $0.65
  • Availability: 3

Bezel Cups 3 mm Fine Silver

Fine silver bezel attach to Silver-clay with a little silver slip, fire and add a Cab that cannot be fired like lapis. Push the sides of the bezel in to hold stone. 3 MM
  • $0.32
  • Availability: 28

Bezel Cups 5 mm Fine Silver

Fine silver bezel attach to Silver-clay with a little silver slip, fire and add a Cab that cannot be fired like lapis. Push the sides of the bezel in to hold stone.
  • $0.29
  • Availability: 51

Bezel Cups 8 mm Fine Silver

Fine silver bezel attach to Silver-clay with a little silver slip, fire and add a Cab that cannot be fired like lapis. Push the sides of the bezel in to hold stone. 8 mm round
  • $1.04
  • Availability: 29

Rio Cold Mold

This revolutionary two-part compound cold-flows and does not require heat for vulcanization. Knead equal parts of the A and B putties together, press it around your pattern and cure at room temperature. Takes 15 min. Makes around 2 pints of material.
Two-part Rio Cold-Mold compound delivers 0% shrinkage without heat.;Combine equal amounts of each part, no release agents are needed—ideal for molding delicate originals or master models. Ideal for use with PMC. Sil-ColdMold
  • $31.75
  • Availability: 6

Embedable Eyelet for Metal Clay 2.5mm

Sil-Eyelet is a Fine Silver Screw Eye, Embedable Eyelet for Metal Clay 2.5mm. Made with our exclusive silver alloy--featuring a very high silver content!--this silver Embeddables® eyelet can be safely fired with your PMC® or other silver metal clay designs. Can also be used in glass fusing techniques and with polymer clay designs.After firing, your silver clay willsinter fully with the surface, andthe finding itself can be legallymarked as 'Sterling.'
  • $0.59
  • Availability: 30

Shapers ColorShaper modeling tools

Set of 5 COLOUR SHAPERS size 6, taper point, cup round, cup chisel, flat chisel, angle chisel. Quality French product made in China.
Colour Shapers are highly versatile new sculpting tools from Royal Sovereign.
They have a silicone tip and are available in 5 shapes. Colour Shaper allows you to movesoft clay easily, apply slip, carve images in wet silver-clay, sculpt clay and creatively decorate walls and furniture…. the possibilities really are endless. And because they do not absorb silver like a brush, you can simply wipe them clean.
These tools are a valuable additional resource for anyone who enjoys arts or crafts - they are a perfect complement to your brushes.
  • $26.00
  • Availability: 3

Silver Tools Kit /8

8 Piece Silver Tool Kit
with all the tools you need to get started. You'll use these eight essential tools for rolling unfired silver-clay, drilling, cutting, pierced openwork, borders, trims, overall designs, incising, sgraffitoing and more. These tools are for working the UNFIRED clay. Includes a PVC clay roller, needle tool, ring sizer, tissue slicing blade (For curved or straight cuts), Scalpel, Small paint brush, Kempers's WOT wipe out tool for smearing clay with soft rubber edge, and a useful double edged pallet knife for smoothing, cutting or mixing slips.
  • $18.50
  • Availability: 0

Silver Tools Kit /8

8 Piece Silver Tool Kit
with all the tools you need to get started. You'll use these eight essential tools for rolling unfired silver-clay, drilling, cutting, pierced openwork, borders, trims, overall designs, incising, sgraffitoing and more. These tools are for working the UNFIRED clay. Includes a PVC clay roller, needle tool, ring sizer, tissue slicing blade (For curved or straight cuts), Scalpel, Small paint brush, Kempers's WOT wipe out tool for smearing clay with soft rubber edge, and a useful double edged pallet knife for smoothing, cutting or mixing slips.
  • $18.50
  • Availability: 0

Wire Scalloped Bezel .999 Fine Silver

Fine silver bezel wire

Can be imbedded in silver-clay and fired, it will not shrink as the clay does.

Or fire the piece, wrap the bezel wire around your irregular stone. Carefully, preserving the shape, glue the bezel wire to the fired sliver-clay with slip and re-fire.

  • $5.21 per Foot 12"
  • Availability: 9

Wire Round .999 Silver 18 Gauge

Round .999 Fine Silver 18 Gauge Wire

Can be imbedded in silver-clay and fired.

click on photo for larger photo

  • $4.90 per Foot 12"
  • Availability: 9


Items 1-28 of 28