Raku Supplies, glazes, safety equipment, and kilns
Items 1-37 of 37

Brick 2300`F Soft 9" x 4.5" x 2.5" 12 Ca

Brick 2300`F Soft 9" X 4.5" X 2.5" is used for constructing kilns, this is the most common insulating brick used in kiln building. It is very soft and easily cut with hand tools. Can be used as a soldering block. Buy 25 get 20% off. You will need 25 to make a base for a raku kiln.
  • $6.50
  • Availability: 29

Max-Wool Thick 2300`F 8 Lbs/cuft

Cerablanket fiber blanket 1" thick, 8 pound, 2400F Max.

Comes on a roll 2 feet wide and 25 ft long. Sold by the square foot. 12" x 12" Buy 50 feet for a full roll and get 20% off.
Use to make a raku kiln, make a heat shield for your muffler, also called Prop or Propit for supporting porcelain in cone 6 firing.
Can be used to make glass fusing mold (use the rigidizer to make the blanket stiff)

  • Produced from high purity Alumina - Silica spun fiber.
  • Contains no organic binders.
  • Low thermal conductivity and heat storage.
  • Resistant to thermal shock and chemical attack.
  • Good acoustical characteristics.
  • Highly flexible; easily cut, fabricated and installed.
  • 2400 F maximum temperature rating
  • Wear Gloves, long sleeves and a respirator when handling!
  • Original Price: $3.95
  • You Save: $0.39
  • $3.56
  • Availability: 100

Raku Tongs Long 52"

Raku Tongs 52" Long Tongs
Superior Reaching Capacity, Sturdy Construction, Large Mouth Opening for larger pots.

NOTE: THIS ITEM WILL NOT SHIP IN A FLAT RATE BOX

  • Original Price: $75.95
  • You Save: $7.59
  • $68.36
  • Availability: 2

Raku Glaze Copper Dry

RAKU GLAZE COPPER (DRY)
Minimum order quantity is 1 lb.

80% Gerstley Borate
20% Nepheline Synite Feldspar
5% Copper Carbonate

Notes:  This is a traditional 80-20 raku glaze. Apply to bisque that has been fired to cone 08, fire until the bubbles stop and the glaze smoothes out usually around cone 06 or 1824F.

The red color will only appear if there is a reduction atmosphere at the high temp. This is usually a result of putting the raku piece in a metal trash can full of organics that catches fire, using up all the oxygen in the can. Also try reducing in the kiln for a more even effect.

 (GLRAKU)


  • $6.25 per POUND
  • Availability: 0

Raku Glaze Clear Crackle Gallon

RAKU GLAZE Clear gallon

80% Gerstley Borate
20% Nepheline Synite Feldspar

Notes:  This is a traditional 80-20 raku glaze. Apply to bisque that has been fired to cone 08, fire until the bubbles stop and the glaze smoothes out usually around cone 06 or 1824F.

The cracks will not be obvious unless the secondary reduction pushes black smoke into the body. This is usually a result of putting the raku piece in a metal trash can full of organics that catches fire, using up all the oxygen in the can.

  • $16.30 per Gallon
  • Availability: 0

Raku Glaze Copper Gallon

RAKU GLAZE COPPER GALLON

80% Gerstley Borate
20% Nepheline Synite Feldspar
5% Copper Carbonate

Notes:  This is a traditional 80-20 raku glaze. Apply to bisque that has been fired to cone 08, fire until the bubbles stop and the glaze smoothes out usually around cone 06 or 1824F.

The red color will only appear if there is a reduction atmosphere at the high temp. This is usually a result of putting the raku piece in a metal trash can full of organics that catches fire, using up all the oxygen in the can. Also try reducing in the kiln for a more even effect.

  • $20.37 per Gallon
  • Availability: 0

Raku Glaze Copper Pint

RAKU GLAZE COPPER PINT

80% Gerstley Borate
20% Nepheline Synite Feldspar
5% Copper Carbonate

Notes:  This is a traditional 80-20 raku glaze. Apply to bisque that has been fired to cone 08, fire until the bubbles stop and the glaze smoothes out usually around cone 06 or 1824F.

The red color will only appear if there is a reduction atmosphere at the high temp. This is usually a result of putting the raku piece in a metal trash can full of organics that catches fire, using up all the oxygen in the can. Also try reducing in the kiln for a more even effect.

  • $8.27 per Gallon
  • Availability: 0

Raku Glaze White Crackle Gallon

RAKU GLAZE WHITE GALLON
 

Notes:  This is a traditional 80-20 raku glaze. Apply to bisque that has been fired to cone 08, fire until the bubbles stop and the glaze smoothes out usually around cone 06 or 1824F.

The cracks will not be obvious unless the secondary reduction pushes black smoke into the body. This is usually a result of putting the raku piece in a metal trash can full of organics that catches fire, using up all the oxygen in the can.

  • $18.88 per POUND
  • Availability: 0

Raku Tongs 41" Length 37° Jaw

RK37 These long-handled raku tongs are used to grip both large and small Raku pieces without danger of burns. Made from rust-free plated steel, the jaws are strong, solid steel with secure lightweight tubular handles. In the picture, the RK37 are the bigger tongs without teeth.

NOTE: THIS ITEM WILL NOT SHIP IN A FLAT RATE BOX

  • Original Price: $56.99
  • You Save: $5.70
  • $51.29
  • Availability: 3

Raku Tongs 31.5" Length 45° Jaws & Teeth

RK45 These long-handled raku tongs are used to grip both large and small Raku pieces without danger of burns. Made from rust-free plated steel, the jaws are strong, solid steel with secure lightweight tubular handles. In the picture, the RK45 are the smaller tongs with teeth.

NOTE: THIS ITEM WILL NOT SHIP IN A FLAT RATE BOX

  • Original Price: $56.99
  • You Save: $5.70
  • $51.29
  • Availability: 2

Kiln Raku RIN 32" X 26" Cone 5 7.4cuft

INTERMEDIATE  Raku kiln 32"X 26" Cone 5 It goes up and down...

.• Easy-Lift firing chamber
• Heavy-gauge steel construction
• Castable refractory floor
• Firing chamber lined with high-density fiber
• Water column gauge for accurate firing
• 100% safety shut-off valve
• Comprehensive owner’s manual and firing guide
• Stainless steel or galvanized hood (optional)
• Electric Auto-Lift for additional ease and safety (optional)
• 4" casters (optional)


******** Specify LP or Natural Gas *********
Plumbing is for natural gas ends in main shutoff - 3/4" pipe
Propane needs low pressure regulator $54.95- 2 stage from 5-15 psi then to 5-1/2 psi = 11" WCP
This item takes an additional 2 weeks and is special order.
Clearance needed 104"min
Call for freight quote, crating charge, lift gate all extra.

  • $1,890.00
  • Availability: -1

Kiln Raku 23" x 26" Cone 5

STANDARD Raku kiln 24"X 26" Cone 5 It goes up and down...

.• Easy-Lift firing chamber
• Heavy-gauge steel construction
• Castable refractory floor
• Firing chamber lined with high-density fiber
• Water column gauge for accurate firing
• 100% safety shut-off valve
• Comprehensive owner’s manual and firing guide
• Stainless steel or galvanized hood (optional)
• Electric Auto-Lift for additional ease and safety (optional)
• 4" casters (optional)


******** Specify LP or Natural Gas *********
Plumbing is for natural gas ends in main shutoff - 3/4" pipe
Propane needs low pressure regulator $54.95- 2 stage from 5-15 psi then to 5-1/2 psi = 11" WCP
This item takes an additional 2 weeks and is special order.
Clearance needed 104"min
Call for freight quote, crating charge, lift gate all extra.

  • $1,640.00
  • Availability: 0

Kiln Raku SUPER 32" x 30" Cone 5

SUPER Raku kiln 32"X30" Cone 5 It goes up and down..

.• Easy-Lift firing chamber
• Heavy-gauge steel construction
• Castable refractory floor
• Firing chamber lined with high-density fiber
• Water column gauge for accurate firing
• 100% safety shut-off valve
• Comprehensive owner’s manual and firing guide
• Stainless steel or galvanized hood (optional)
• Electric Auto-Lift for additional ease and safety (optional)
• 4" casters (optional)


******** Specify LP or Natural Gas *********
Plumbing is for natural gas ends in main shutoff - 3/4" pipe
Propane needs low pressure regulator $54.95- 2stage from 5-15psi then to 5-1/2psi = 11"WCP
This item takes an additional 2 weeks and is special order.
Clearance needed 104"min
Call for freight quote, crating charge, lift gate all extra.

  • $2,185.00
  • Availability: 0

Orifice Propane LP #50 tip

Orifice for propane at 5000+ feet. Fits the Venturi burner.
  • $3.10
  • Availability: 8

White Matte Raku Dry

LGR01 White Matte Raku Dry
  • $2.28 per POUND
  • Availability: 40

Tutti Frutti Raku Dry

LGR02 Tutti Frutti Raku Dry
  • $2.82 per POUND
  • Availability: 0

Lithium Slip Raku Dry

LGR14 Copper Raku Dry
  • $8.81 per POUND
  • Availability: 8

Dark Red Raku Dry

LGR15 Dark Red Raku Dry
  • $4.18 per POUND
  • Availability: 12

Bronze Raku Dry

LGR21 Bronze Raku Dry
  • $6.46 per POUND
  • Availability: 6

Uguisi Nightingale Raku Dry

LGR23 Uguisi Nightingale Raku Dry
  • $5.66 per POUND
  • Availability: 32

Shinju Raku Dry

LGR27 Shinju Raku Dry
  • $6.68 per POUND
  • Availability: 4

Burner Venturi Propane orifice

FS-122 VENTURI BURNER This burner is one of the most effective burners available for its price and size. It's tapered throat creates its own vacuum, thereby increasing the velocity of the flame through the burner. Cast into the tip of the burner is a flame retention nozzle that condenses the flame to its maximum heat capacity. This burner also has primary air shutter and a removable orifice for maximum burner adjustment. The total length of the burner is only 8", yet it yields approximately 75,000 B.T.U. per hour at 7" of water column pressure. Screws into a s ½ " pipe fitting For propane gas.
  • $54.00
  • Availability: 2

Black Metallic Pint

MCRK100-P Black Metallic Raku Glazes From 16th century methods founded in Japan to the 20th century reduction methods of the West, raku has always revealed exciting and dramatic results. Mayco Raku glazes produce a variety of metallized, brilliant and crackled finishes. All glazes are non-toxic, formulated using no added lead or other health caution materials. We recommend using a thermal shock-resistant Raku clay body (will help reduce the incidence of cracking). As glaze application, glaze fire temperature, combustible materials, firing process and kiln type vary from artist to artist, final results will vary. Our product testing involved a Raku clay body, Raku kiln and straw for our reduction material. Raku can be done in a gas or electric kiln environment as well. Maturing the glaze at lower temperatures and using different combustible materials such as sawdust, newspaper, straw, etc will greatly influence the colors and look of the glaze. Minimizing the distance between the kiln and the reduction container will also enhance color. Proper safety processes and personal protective equipment are very important when doing Raku as you are exposed to high heat, flames and smoke. Always wear heat and fire protective clothing and fireproof gloves. Do not open or insert tongs into an electric kiln without shutting off. Reduction process should take place outside of building due to flames and smoke.
  • Original Price: $12.25
  • You Save: $1.22
  • $11.03
  • Availability: 3

Copper Metallic Pint

MCRK101-P Copper Metallic
  • Original Price: $12.25
  • You Save: $1.22
  • $11.03
  • Availability: 2

White Crackle Pint

MCRK103-P White Crackle
  • Original Price: $12.25
  • You Save: $1.22
  • $11.03
  • Availability: 3

Red Pint

MCRK104-P Red
  • Original Price: $12.25
  • You Save: $1.22
  • $11.03
  • Availability: 0

Copper Penny Pint

MCRK105-P Copper Penny
  • Original Price: $12.25
  • You Save: $1.22
  • $11.03
  • Availability: 0

Peacock Matte Pint

MCRK106-P Peacock Matte
  • Original Price: $12.25
  • You Save: $1.22
  • $11.03
  • Availability: 2

Oil Slick Pint

MCRK107-P Oil Slick
  • Original Price: $12.25
  • You Save: $1.22
  • $11.03
  • Availability: 2

Kiln Gas Olympic 2327 & Ignition System

Olympic gas kilnOlympic gas kiln

  •  Cone 10
  •  23" wide by 27" tall
  •  with ignition system.
  • Thermocouple Safety Shut-off
  •  Propane or Natural Gas
  • Inside dimensions: 23 3/8" wide x 27" deep
  • Fires to cone 10/2350°F
  • One-year warranty

Model comes with burner system, three peephole plugs, brick for covering porthole on top during reduction, instruction manual, and warranty card.

The ignition system with thermocouple safety shut-off is an option and the kiln may be purchased with no safety devices. . OK2327GAS

  • Original Price: $2,060.00
  • You Save: $412.00
  • $1,648.00
  • Availability: 0

Kiln Gas 18 Raku, LP, Ignition System

18 Raku Kiln with Ignition System and Thermocouple Safety Shut-off

Kiln is cranked up and down, will fire Raku pots in 20 minutes after kin is heated up. olympic raku kiln
Raku kiln Propane or Natural Gas Inside dimensions: 17 ½ " wide x 22 ½" deep, fires to cone 10/2350° F

Kiln comes with frame welded to firing chamber, two peephole plugs, brick for covering porthole on top during reduction, instruction manual, and warranty card.  One-year warranty.

The ignition system with thermocouple safety shut-off is an option and the kiln may be ordered with no safety devices

  • Original Price: $1,840.00
  • You Save: $184.00
  • $1,656.00
  • Availability: 0

Raku Classroom Kit

Everything you need to set up a raku kiln except the propane!
  • $2,458.95
  • Custom Configuration

Rigidizer Pint

Rigidizer by the Pint, used to make kaowool stiff. Colloidal silica. Spray onto kaowool and allow to air dry. Can be used to make molds for glass slumping. Will not make the kaowool blanket rigid enough to hold its shape at cone 10, say as a kiln ceiling. Also available in gallons.
  • $8.30
  • Availability: 8

Sleeve Terrycloth 15 350+fmax

Sleeve Terrycloth 15" 350f max. Protect your forearms.
  • Original Price: $6.55
  • You Save: $0.65
  • $5.90
  • Availability: 2

Glove Kevlar14" Length High Heat Pair

Glove Kevlar 14"Long High Heat Pair, You could grab a 1000' F pot with these gloves, but who would want to?
  • Original Price: $55.28
  • You Save: $5.53
  • $49.75
  • Availability: 3

Glove Kevlar 23" Length High Heat Pair

Glove Kevlar 23"Long High Heat Pair, You could grab a 1000' F pot with these gloves, but who would want to? Photo is of the shorter glove
  • Original Price: $85.10
  • You Save: $8.51
  • $76.59
  • Availability: 2

Pyrometer Digital w/Thermocouple Package

We have a new high temperature Dual Input Digital Pyrometer available. This Pyrometer comes with a Type K thermocouple(7 1/4" long) and mounting block, 5 feet of thermocouple wire, and a pyrometer flange for mounting the thermocouple to the kiln. The Pyrometer comes with a case that can be mounted to the wall or it has a flip out back that can be set on a table. Since it is "Dual Input" you can purchase an additional thermocouple package and monitor two kilns. It even remembers the minimum and maximum temperatures recorded in a firing. It is rated to Cone 10 with a plus or minus 0.4% of reading accuracy.
  • $125.00
  • Availability: 0


Items 1-37 of 37