Plaster for candy Molds

AMACO® Plaster Separator is used for sizing an original model made of Setstone, plaster or any other porous material. Also, it is used to size molds when casting reproductions in plaster or Setstone. Although brushing is the usual method of application, AMACO® Plaster Separator may be applied by dipping, pouring or spraying.

Pure greensoap, Dilute up to 8 times with water.

Pure Greensoap. Dilute up to 8 times with water.

A premixed form of greensoap One Gallon

A premixed form of greensoap One Pint.

Cal Wax for casting and carving. sold by the pound. 3 2x2x1" blocks.

USG® No. 1 Pottery Plaster
Highly uniform, USG No. 1 Pottery Plaster is noted for outstanding performance and long life. The standard of the industry, it is the best material available for sanitary-ware and dinnerware slip casting.

Use 70% water for the weight of a given amount of plaster.

USG® No. 1 Casting Plaster
The industry standard for figurines, plaques, and lamp bases. Special additives maintain smooth-working qualities and upon drying, result in a hard working surface with reduced paint absorption and degree of chip-resistance. Use consistency 65

USG® No. 1 Moulding Plaster
Often referred to as “plaster of Paris” or soft plaster. Used for waste molds or temporary patterns where surface hardness and strength are not important. Screeds well under a template but is not as hard or strong as HYDROCAL cement. The expansion is greater than with A-11 or B-11 cements.

CERAMI-CAL® Gypsum Cement
A low-consistency form of HYDROCAL Gypsum Cement formulated to produce a dense, smooth-wearing die material for pressing clay-ware. Characterized by uniform low absorption, high strength and the ability to purge easily, and resistance to wear. Specifically for use with the RAM automatic clay-forming process. Use Consistency 40

USG® No. 1 Moulding Plaster
Often referred to as “plaster of Paris” or soft plaster. Used for waste molds or temporary patterns where surface hardness and strength are not important. Screeds well under a template but is not as hard or strong as HYDROCAL cement. The expansion is greater than with A-11 or B-11 cements.

HYDROCAL Type 105

HYDRO-STONE® Gypsum Cement
One of the hardest and strongest HYDROCAL Brand products. HYDRO-STONE is recommended for producing high-quality novelty and statuary castings requiring extremely hard surfaces. Use Consistency 32

HYDROCAL® White Gypsum Cement
A good general use product that offers a gradual setting time and a long period of plasticity. Recommended for solid and hollow casting of lamp bases and figurines. Designed for thin sections, which require high green strength to minimize breakage during removal from an intricate latex mold. Use Consistency 45

Labrotory dental quick setting plaster, soft. 6-8 min

ULTRACAL® 30 Gypsum Cement
Super-strength gypsum cement recommended where extreme accuracy and greater surface hardness are required, as in duplicator models.
Harder and stronger than HYDROCAL® A-11 and HYDROCAL® B-11 cements, ULTRACAL® 30 cement has the lowest expansion of any rapid-setting gypsum cement available. Has a gradual set and long period of plasticity. Ideal for splash-casting molds and models for phenolic, polyester and epoxy resins.
It was designed to give the pattern making industry the ultimate in a gypsum cement-tooling medium.
Use Consistency 38