Wipe Out Tool WOT, soft rubber tips allow easy sculpting where fingers are too big.

Slicing Blades for polymer clay canes and Silver-Clay projects 4.5" by 3/4" Package of two.

8 Piece Silver Tool Kit
with all the tools you need to get started. You'll use these eight essential tools for rolling unfired silver-clay, drilling, cutting, pierced openwork, borders, trims, overall designs, incising, sgraffitoing and more. These tools are for working the UNFIRED clay. Includes a PVC clay roller, needle tool, ring sizer, tissue slicing blade (For curved or straight cuts), Scalpel, Small paint brush, Kempers's WOT wipe out tool for smearing clay with soft rubber edge, and a useful double edged pallet knife for smoothing, cutting or mixing slips.

A 4mm stone can be set in this fine silver setting. Use slip type silver clay to glue the setting to your piece then fire.

Pure Silver Bail Back (11mm)(1pc) Can be fired in with Art Clay Silver or PMC

This fine silver brooch is 35mm long and needs to be mounted with slip and lined up correctly. Pure Silver
1 piece (35mm) DO NOT FIRE THE PIN.

Art Cork Clay Art Clay Cork Clay: a modeling compound made of cork that burns out in firing. The best thing for making hollow beads.

One pair of plastic strips. (1mm thick 5" Long and 3/4" wide) Used as a thickness gauge when rolling out Silver-Clay. Very durable!

wrap it around your finger, it tells you your ring size. Or wear it as a ring.

Use a jump ring and this fine silver Screw Eye to make a necklace.

NuBlade Here is the first blade designed specifically for use with polymer clay. The NuBlade is a full 6" long, 3/4" wide, and is thicker than razor blades. It provides clean, accurate cuts even on large diameter canes or polymer clay blocks. Made of stainless steel, it resists oxidation and stays sharp two to three times longer than other blades.

Marxit is the only ruler designed with the polymer clay artist in mind. This six-sided tool ensures perfect and uniform polymer clay beads and strips every time. Each side has markings in one of six increments from 3 to 20 millimeters. Simply press Marxit gently into the clay then cut with a sharp blade at the desired marks. It's that simple!

NuFlex This unique, super flexible blade makes curved cuts and arcs in polymer clay or canes. It is a full 6" long, is made of stainless steel, and makes micro thin cuts like the NuBlade. This blade allows the user to create a wide variety of shapes that cannot be made with other blades.

Clay Roller This handy, portable roller is ideal for working with polymer clay at home or while traveling. It is an 8" solid acrylic rod designed to help condition polymer clay, roll out sheets, and smooth clay surfaces. It has a non-stick surface that wipes clean with alcohol for easy clean-up.

Another version of our tool kit optimized for BRONZclay and COPPRclay.

Stoneware clays shrink about 6% from web to bone dry. They shrink insignificantly in the bisque firing, and about 6% in a cone 10 glaze firing. Total shrinkage from wet to glaze fired is therefore about 12% when working at cone 10. Different clays shrink somewhat more or less. A lower glaze firing temperature will produce a lower shrinkage rate. Your piece may shrink more in one direction than another direction also. For instance, a thrown cylinder may shrink a greater percentage in its diameter than in its height. A rolled slab may shrink a greater percentage in the rolled direction than in its width. A little experimenting with the Creative Industries Shrink Rule will quickly give you a high degree of accuracy in predicting shrinkage in your particular clay, in your studio, using your techniques. Instructions: 1. If you want a piece to measure 8" after a 12% shrinkage, use the 12% scale on your Shrink Rule to measure 8" on the wet clay. 2. To make a replacement lid for a casserole which has been bisqued, measure the casserole with a regular ruler. Use this same measurement on the wet clay using the 6% scale on your Shrink Rule. 3. Your friend just broke her teapot lid. You have lots of teapot lids which have been bisqued, but which one, after its glaze firing will fit your friends teapot? Measure the teapot with a regular ruler. Now find the bisque lid with the same measurement using the 6% scale on your Shrink Rule.

Creative Paperclay A paper based modeling material. Sculpt a bead, paint it with 3 coats of silver Slip and fire. The Paperclay burns out leaving a hollow bead.

Creative Paperclay A paper based modeling material. Sculpt a bead, paint it with 3 coats of silver Slip and fire. The Paperclay burns out leaving a hollow bead.

Detail Carving Tools easily carve small and miniature details. They are perfect for that extra touch. The steel blades are formed and precision ground to a sharp point. The DCS tip is a .030" wide point and 5" in total length, while the DCL point is .057" wide and 5" in total length. In the picture, the DCS has the smaller of the two tips. DCS

A mix that requires 35% water. Example: to 100 grams of investment use 35 grams of water, or use approx 2 Tablespoons investment, to 2.5 teaspoons of water. Sets in 6-8 Minutes. Dry before using.
CAUTION Contains free silica. Avoid breathing the dust.
To make a Ring Form wrap a piece of paper around the finger needing a ring, carefully tape it so it holds it's shape. Place paper ring on a smooth surface and fill with investment mix. +Allow a day to dry, and make a ring larger than the investment finger you have made place the larger ring (two sizes) on the cylinder and fire! Investment washes out under water after firing.

Very nice little bails to be glued on. Sterling Silver

PAS The Patching Spatula is used for patching greenware. It is also used as a small palette knife. It contains two stainless steel blades (1" and 1 1/2") inserted in hardwood handles.

PCN The Potter's Cut-Off Needle is a necessity for all potters, this 1 15/16" long, thin heat-treated steel needle makes a clean smooth cut with a minimum of drag when removing the uneven top edge of thrown items.

Roller 7" PVC 3/4"
This roller and a deck of cards is all you need to roll out Silver-Clay.
Make stacks of cards 3 or 4 high to use as rolling thickness guides. and use the 3 (or 4) as the top cards so you will know how many are in each stack. Use these stacks to vary the thickness of your silver clay slabs.

Shade-Tex Rubbing Plates, Nature Set, Full Size Sheets! Create countless patterns on paper, foil, even clay! Textured designs are molded right into flexible and sturdy large plastic rubbing plates. Fun and easy to use. Instantly adds intriguing patterns to drawings, greeting cards, murals, and collage. Twist and turn to achieve cross-hatching, halftones or pointillism. Obtain dramatic results with crayon, and coloring or graphite pencils. Use rubbing plates to add texture to clay. Simply use a rolling pin or a brayer to achieve an imprint or pass the plate and a slab of clay through a pasta machine at a wide setting. Set of 6, 8 1/2" x 11" plates includes one of each texture. Gravel, wood grain, water, plants, leaves and grass.

Shade-Tex Rubbing Plates, Architecture Set Create countless patterns on paper, foil, even clay! Textured designs are molded right into flexible and sturdy large plastic rubbing plates. Fun and easy to use. Instantly adds intriguing patterns to drawings, greeting cards, murals, and collage. Twist and turn to achieve cross-hatching, halftones or pointillism. Obtain dramatic results with crayon, and coloring or graphite pencils. Use rubbing plates to add texture to clay. Simply use a rolling pin or a brayer to achieve an imprint or pass the plate and a slab of clay through a pasta machine at a wide setting. Set of 6, 8 1/2" x 11" plates includes one of each texture. Large and small brick, stone, slate, tile, large and small siding, and large and small shingles.

Shade-Tex Rubbing Plates, Textile Set Create countless patterns on paper, foil, even clay! Textured designs are molded right into flexible and sturdy large plastic rubbing plates. Fun and easy to use. Instantly adds intriguing patterns to drawings, greeting cards, murals, and collage. Twist and turn to achieve cross-hatching, halftones or pointillism. Obtain dramatic results with crayon, and coloring or graphite pencils. Use rubbing plates to add texture to clay. Simply use a rolling pin or a brayer to achieve an imprint or pass the plate and a slab of clay through a pasta machine at a wide setting. Set of 6, 8 1/2" x 11" plates includes one of each texture. Burlap, large and small lace, linen, knit, herringbone, and hounds tooth.

Shade-Tex Rubbing Plates, Cultural Pattern Set- Full Size Sheets! Create countless patterns on paper, foil, even clay! Textured designs are molded right into flexible and sturdy large plastic rubbing plates. Fun and easy to use. Instantly adds intriguing patterns to drawings, greeting cards, murals, and collage. Twist and turn to achieve cross-hatching, halftones or pointillism. Obtain dramatic results with crayon, and coloring or graphite pencils. Use rubbing plates to add texture to clay. Simply use a rolling pin or a brayer to achieve an imprint or pass the plate and a slab of clay through a pasta machine at a wide setting. Set of 6, 8 1/2" x 11" plates includes African adire textiles pattern. Asian fans and waves. Celtic braid and interlocking circles. 37 Egyptian symbols. Islamic mosaic and tiles, and Latin American mola and geometric design.

Shade-Tex Rubbing Plates, Nature Two Set Create countless patterns on paper, foil, even clay! Textured designs are molded right into flexible and sturdy large plastic rubbing plates. Fun and easy to use. Instantly adds intriguing patterns to drawings, greeting cards, murals, and collage. Twist and turn to achieve cross-hatching, halftones or pointillism. Obtain dramatic results with crayon, and coloring or graphite pencils. Use rubbing plates to add texture to clay. Simply use a rolling pin or a brayer to achieve an imprint or pass the plate and a slab of clay through a pasta machine at a wide setting. Set of 6, 8 1/2" x 11" plates includes one of each texture. Bubbles, Butterflies, Flowers and Vines, Seashells, Snowflakes and Stars.

Shade-Tex Rubbing Plates, Design Set Create countless patterns on paper, foil, even clay! Textured designs are molded right into flexible and sturdy large plastic rubbing plates. Fun and easy to use. Instantly adds intriguing patterns to drawings, greeting cards, murals, and collage. Twist and turn to achieve cross-hatching, halftones or pointillism. Obtain dramatic results with crayon, and coloring or graphite pencils. Use rubbing plates to add texture to clay imagine making clay look like leather! Simply use a rolling pin or a brayer to achieve an imprint or pass the plate and a slab of clay through a pasta machine at a wide setting. Set of 6, 8 1/2" x 11" plates includes one of each texture. Parallel lines, waves, swirled dots, dots in a grid, dense dots, and squiggles.

Scalpel SHARP!

Fine silver bezel attach to Silver-clay with a little silver slip, fire and add a Cab that cannot be fired like lapis. Push the sides of the bezel in to hold stone. 3 MM

Fine silver bezel attach to Silver-clay with a little silver slip, fire and add a Cab that cannot be fired like lapis. Push the sides of the bezel in to hold stone.

Fine silver bezel attach to Silver-clay with a little silver slip, fire and add a Cab that cannot be fired like lapis. Push the sides of the bezel in to hold stone. 8 mm round

This revolutionary two-part compound cold-flows and does not require heat for vulcanization. Knead equal parts of the A and B putties together, press it around your pattern and cure at room temperature. Takes 15 min. Makes around 2 pints of material.
Two-part Rio Cold-Mold compound delivers 0% shrinkage without heat.;Combine equal amounts of each part, no release agents are needed—ideal for molding delicate originals or master models. Ideal for use with PMC. Sil-ColdMold

Packaged in handy 1-oz. portions, this six-pack of Cold Mold lets you mix up a small amount of compound quickly and easily with no measuring or guesswork. They're so compact and portable that you can carry them with you wherever you go, ready to capture a unique pattern or texture in minutes!

Two-part Rio Cold-Mold compound delivers 0% shrinkage without heat. Combine equal amounts of each part, no release agents are needed. Ideal for molding delicate originals, master models and for use with metal clay. This revolutionary two-part compound cold-flows and does not require heat for vulcanization. Knead equal parts of the A and B putties together, press it around your pattern and cure at room temperature. Takes 15 min.

Two-part Rio Cold-Mold compound delivers 0% shrinkage without heat.;Combine equal amounts of each part, no release agents are needed—ideal for molding delicate originals or master models. Ideal for use with PMC.

Hole Cutters provide an easy method for cutting clean holes in wet thick-wall greenware and wet clay. All five sizes can be used to achieve a variety of designs. All of these hole cutters have sharp, polished brass, cutting tubes with the smaler sizes firmly set in hardwood handles. The two larger tubes have ends covered wit a rubber cap for comfort. The HC1 is the smallest hole cutter in the picture. (On the bottom.) HC1

Set of 5 COLOUR SHAPERS size 6, taper point, cup round, cup chisel, flat chisel, angle chisel. Quality French product made in China.
Colour Shapers are highly versatile new sculpting tools from Royal Sovereign.
They have a silicone tip and are available in 5 shapes. Colour Shaper allows you to movesoft clay easily, apply slip, carve images in wet silver-clay, sculpt clay and creatively decorate walls and furniture…. the possibilities really are endless. And because they do not absorb silver like a brush, you can simply wipe them clean.
These tools are a valuable additional resource for anyone who enjoys arts or crafts - they are a perfect complement to your brushes.

8 Piece Silver Tool Kit
with all the tools you need to get started. You'll use these eight essential tools for rolling unfired silver-clay, drilling, cutting, pierced openwork, borders, trims, overall designs, incising, sgraffitoing and more. These tools are for working the UNFIRED clay. Includes a PVC clay roller, needle tool, ring sizer, tissue slicing blade (For curved or straight cuts), Scalpel, Small paint brush, Kempers's WOT wipe out tool for smearing clay with soft rubber edge, and a useful double edged pallet knife for smoothing, cutting or mixing slips.

Kit includes: one 2 oz. bottle of veneer solution Everything you need to mix, stir and prepare PMC Veneer Instructional mini CD Think of it as wallpaper-but wallpapaer featuring your design! In just a few steps, you can produce a flexible, customized PMC sheet to apply to flat or curved surfaces. Once fired, the sheet becomes a permanent piece of your design--an additional layer on a pendant, a graceful wrap around an orgaic stone, or a intricate embellishment around the edge of a cup or vessel. This is only the short list.

Fine silver bezel wire

Round .999 Fine Silver 18 Gauge Wire